Honeywell Air Touch V3 Value Air Purifier

Honeywell Air Touch V3 Value Air Purifier offers air purification for healthier indoor environment.

Air Touch V3 Value Air Purifier can cover area of up to 465 square feet / 43 square meters.

Air Purifier features an advanced 5-stage filtration system, delivering up to 5 air changes per hour.

Offers 3 air-purifying speeds, including Auto and Turbo modes, for customized air cleaning.

Has real time PM2.5 level indicator.

Honeywell Air Touch V3 Value Air Purifier has advanced filtration system, capable of achieving 5 air changes per hour, ensuring rapid removal of airborne pollutants and allergens for a fresher environment.

Air Purifier has dual protection of a pre-filter and H13 HEPA filter, effectively trapping particles of various sizes, including fine dust and allergens, to provide you with cleaner and safer air.

Air Touch V3 Value Air Purifier efficiently absorbs and eliminates unwanted smells, leaving your space refreshed and pleasant.

Air Purifier comes with the sleep mode that offers gentle purification, along with the option to set a timer for 1, 2, 4, or 8 hours, ensuring you wake up to fresher air.

Ensures dual protection of a pre-filter and H13 HEPA filter, effectively trapping particles of various sizes, including fine dust and allergens, to provide you with cleaner and safer air.

Place the Honeywell Air Touch V3 Value Air Purifier on a flat surface with at least 30 cm of space around it for proper airflow.

Unpack the unit and remove all plastic films and packaging materials from the filters before installation.

Open the front panel and insert the pre-filter, HEPA filter, and activated carbon filter in the correct order as shown in the manual.

Close the front panel securely to ensure the purifier operates effectively.

Plug the purifier into a power outlet and press the power button to turn it on.

Select your preferred fan speed or purification mode based on the air quality in the room.

Keep windows and doors closed while the purifier is running to maximize air cleaning performance.

Clean the pre-filter every two to four weeks to remove dust and maintain steady airflow.

Replace the HEPA and activated carbon filters when indicated by the filter replacement alert or as per usage recommendations.

Switch off and unplug the purifier before cleaning or during long periods of non-use to ensure safety and durability.

Place the Honeywell Air Touch V3 Value Air Purifier on a flat and stable surface away from direct sunlight, heat sources, and moisture.

Use only the original power cord and plug it directly into a standard wall outlet; avoid using damaged cords or extension leads.

Do not operate the purifier in wet or damp areas to prevent the risk of electric shock.

Ensure there is at least 30 cm of space around the air inlet and outlet for proper airflow and cooling.

Always turn off and unplug the purifier before opening the unit or replacing filters.

Keep the air inlet and outlet free from obstructions such as curtains, walls, or furniture.

Do not insert fingers or any foreign objects into the vents to avoid injury or damage.

Keep the device and its power cord out of reach of children and pets.

Clean the exterior surface with a dry, soft cloth only; do not use water or cleaning agents.

If the purifier malfunctions or shows signs of damage, stop using it immediately and contact an authorized Honeywell service center for assistance.